The smartIAQ Hub-4 allows you to easily power up to 4 smartIAQ GridSet systems with the simplicity of structured, low voltage wiring.
With a single 120 VAC input, it uses CAT-5/5e cable with RJ45 connectors for distribution of 48 VDC power to GridSet. This makes for simple installation, reducing complexity and labor costs.
The smartIAQ Hub-4 Pro combines the ease of low voltage power distribution with BMS connectivity.
Building on the Hub-4 platform, the Hub-4 Pro additionally provides a single BMS connection point to facilitate communication with, and control of, up to four smartIAQ GridSet Pro Systems.
Both BACnet and Modbus Protocol variants are available for air quality monitoring, insights, and unit control.
Uses CAT-5/5e cable with RJ45 connectors for both distribution of 48 VDC power and BMS communication.
Add a second molecular filter or use our >99.7% removal high efficiency particulate filter for areas that require specialized or higher levels of contaminant removal.
*Based on ASHRAE Published Generation Rates in a single room application.
Simple maintenance with a long-life filter that captures particulate and gas contaminants all in one. CompleteAQ is a Single 2” filter that is rated for both Standards 52.2 and 145.2 for particle and gas design compounds with integrated formaldehyde removal media.
Standard size 20"x20"x2" provides 2+ years of operation, reducing labor and maintenance costs.
*Based on ASHRAE Published Generation Rates in a single room application.
The OL11 series of MERV 11 filters from GPS Air are specifically optimized to work with Opti-Lok® products such as the PF-e® and PF-i®. Very fine particle removal performance is equivalent to that of other standard MERV 13 filters.
These fully synthetic non-shedding microfiber mini-pleat panel filters provide up to 5 times the amount of media of most pleated filters of the same size. This high loading capacity means a longer service life and fewer filter changes.
2" deep filters, available in most popular sizes, last up to a year between changes. See Product Data Sheet.
The OL14 series of MERV 14 filters from GPS Air are specifically optimized to work with Opti-Lok® products such as the PF-e® and PF-i®. Very fine particle removal performance is equivalent to that of other standard MERV 16 filters.
These fully synthetic non-shedding microfiber mini-pleat panel filters provide up to 5 times the amount of media of most pleated filters of the same size. This high loading capacity means a longer service life and fewer filter changes.
2" deep filters, available in most popular sizes, last up to a year between changes. See Product Data Sheet.
The PS-2 is a single power transformation solution for compatible GPS ionizer products.
Made in the USA with U.S. and global parts.
Input voltage of 110-277 VAC
Output voltage of 24 DC
Frequency 50/60 Hz
UL and cUL approved
UL 62368 (Class 2 Power Unit)
7.4"L × 1.6"T × 2.4"W
0.45 lbs
The DM-S is a single adaptable saddle solution for installing the GPS® DM-2® onto varying round duct diameters of 6" and up.
The DM-S saddle installation accessory is sold separately from NPBI® systems.
8.5"W × 6.5"H × 2.0"L
0.5 lbs
The IDF-CM is a mounting solution to enable the IDF-2® to be mounted on hard ceilings.
Suitable for use with substrates able to support the combined weight of the ceiling mount and IDF-2 such as concrete, stone, wood or metal.
The LS-277V and LS-347V are each separately available power transformation solutions for the IDF-2.
Up to four (4) fans, 75-watt capacity.
Input voltage of 277 VAC or 347VAC
Output voltage of 120 VAC
Frequency 60 Hz
UL and cUL approved
3.2"L × 2.6"T × 2.2"W
The GPS-iMEASURE-D ion detector is permanently mounted in the duct downstream of any GPS ionization device.
It measures ion levels in real time and reports back to a BAS. It includes three sensitivity levels, 20,000/200,000/2,000,000 ions/cc, that can be set based on the application and in-duct location.
The GPS iMEASURE is the first commercially available ion detector that can be permanently mounted in the space to measure ion levels in real time and report back to a BMS.
Auto Calibration
Auto Zero
0–10 VDC Output for BAS Monitoring 24/7
Watchdog Timer
Bi-Color LED
0–1,000,000 Ions/cc Range
The GPS-iDETECT-P is a plenum-mounted ionization detector that can confirm the output from the GPS-iMOD® System.
The GPS-iDETECT-P provides the ability to monitor ionization status in a plenum to confirm that the ionization equipment installed is working properly. The sensor is designed for duct mounting.
The GPS-NEMA4-OE is a NEMA 4x-rated fiberglass enclosure designed to house one GPS-iMOD power supply.
The panel adds a superior finished look to any project while providing the required protection against foreign substances, such as water and dust, when power supplies are mounted in non-NEMA 1 rated environment.
Numerous options for navigations, footers, hero sections, columns, tabs, cards, stats, carousels, and more.
